FUSION GO
CHROME FREE HARDFACING WELD WIRE FOR HIGH ABRASION AND MODERATE IMPACT
FUSION™ GO
FUSION™ GO is a unique chrome free hardfacing wire, meant for particularly high abrasive wear and moderate impact applications. Being chrome-free there is no hexavalent chromium produced by the welding wire when being used. The special formulation allows you to produce excellent abrasion resistance in a single layer. It can be applied to carbon, low alloy, or manganese steels and can be used in hot wear applications up to 1100°F. No shielding gas is required for this welding wire making it a convenient material to work with. FUSION GO hardfacing wire is formulated to be used in applications where sand and earth are the main wear material.
FUSION™ GO is a unique chrome free hardfacing wire, meant for particularly high abrasive wear and moderate impact applications. Being chrome-free there is no hexavalent chromium produced by the welding wire when being used, eliminating health concerns. The special formulation allows you to produce excellent abrasion resistance in a single layer. It can be applied to carbon, low alloy, or manganese steels and can be used in hot wear applications up to 1100°F. No shielding gas is required for this welding wire making it a convenient material to work with. FUSION™ GO hardfacing wire is formulated to be used in applications where sand and earth are the main wear material.
Common applications include:
- Buckets/Shovels
- Chutes/Hoppers
- Dredge Parts
- Drag Line Components
- Mining Equipment
- Slurry Pipes
Typical Deposit Characteristics
| Abrasion Resistance | Excellent |
| Impact Resistance | Moderate |
| Hardness | HRC 60 – 65 |
| Deposit Layers | 2 Layer Max. (Based on 1/8” thickness per layer) |
| Surface Cross Checks | Yes |
| Machinability | No |
| Hot Wear Applications | Up to 1100°F |
Operational Characteristics / Welding Parameters
| Diamete, in (mm) | 0.045 (1.2mm) OR 1/16" (1.6mm) |
| Current, Amp DCEP | 140 – 230 OR 180 - 300 |
| Voltage | 23 - 32 |
| Wire Extension, in (mm) | 1" – 2" (25mm - 50mm) |
| Shielding Gas (Not required) | If Desired: 100% CO2 OR 75% Ar / 25% CO2 |
| Position | Flat, Half Up, Half Down |
Typical All-Weld Metal Analysis
- C: 0.5
- Mn: 2.00
- Si: 1.30
- Ni: 2.00
- B: 4.50
- Ti: 0.30
- Fe: Bal
Alloy Type
Boron carbides in a martensitic matrix.
Typical Applications
- Buckets/Shovels
- Chutes/Hoppers
- Dredge Parts
- Drag Line Components
- Mining Truck Beds
- Slurry Pipes
Standard Sizes & Packaging
Diameter: .045” (1.2mm) OR 1/16” (1.6mm)
Packaging: 33 lbs. Spools OR 55 lbs. Coil
DOWNLOAD THE SPECS
DO YOU NEED A PRINT OUT OF THE ABOVE INFORMATION?
We’ve made printing and presenting our information easy for you. Just download our Fusion GO Weld Wire & Rod Specification Document (PDF). If you need additional information, please contact us today!
EXPLORE MORE FUSION™ WELD WIRE & ROD PRODUCTS
