FUSION 600

HIGH CHROMIUM WELD WIRE FOR SEVERE ABRASION AND MODERATE IMPACT

FUSION^™ 600

FUSION 600 is a high chromium cast iron for hardsurfacing components subject to extreme abrasive wear and moderate impact. The deposit of FUSION 600 contains a high quantity of hard primary chromium carbides in a tough austenitic matrix. The deposit produced is similar to CHROMEWELD 600. Using special weld settings, FUSION 600 can be welded out of position. This product is used for hardfacing components experiencing wear by sand, earth and abrasives.

Abrasion Resistance is rated as Excellent, and Impact Resistance is rated as Moderate.

Common applications include:

Dredge Pump Bodies
Earth Moving Equipment
Mining Equipment
Sand Dredge Parts
Sugar Mill Equipment
Brick Muller Tyres
Coal Pulverisor Rolls

Typical Deposit Characteristics

Abrasion Resistance	Excellent
Hardness	58 - 65 HRc (61 HRc avg.)
Impact Resistance	Moderate
Deposit Layers	Up to 3

Operational Characteristics / Welding Parameters

Current Type = CV DCEP

Diameter	0.045” Range	0.045” Horizontal	0.045” Vertical
Stickout	1/2" - 1 1/2"	3/4"	5/8"
Voltage	19 -32	25	21
Wire Speed	110 - 450" / min	290" / min	115" / min
Amps Produced	100 - 300" / min	200" / min	105" / min

Diameter	1/16” Range	1/16” Horizontal	1/16” Vertical
Stickout	1/2" - 1 1/2"	3/4"	5/8"
Voltage	20 -34	26	21
Wire Speed	85 - 350" / min	225" / min	90" / min
Amps Produced	100 - 350	205	110

Current Type = CV DCEP

Typical All-Weld Metal Analysis

C: 5.7
Mn: 0.5
Si: 1.6
Cr: 31

Alloy Types

Primary carbides and eutectic carbides of the M7C3 type in an austenitic matrix

Typical Applications

Standard Sizes & Packaging

Diameter: 0.045” (1.2mm) OR 1/16” (1.6mm)

Packaging: 33 lbs. Spools OR 55 lbs. Coil

DOWNLOAD THE SPECS

DO YOU NEED A PRINT OUT OF THE ABOVE INFORMATION? We’ve made printing and presenting our information easy for you. Just download our Fusion 600 Weld Wire & Rod Specification Document (PDF). If you need additional information, please contact us today!