CHROMEWELD FLOW

Extreme Abrasion Resistant Chromium Carbide Overlay Plate

CHROMEWELD™ FLOW CHROMIUM CARBIDE OVERLAY PIPE

CHROMEWELD™ FLOW is chromium carbide overlay pipe bringing high quality, abrasion resistant pipe to the industries who need it the most

Incredible hardness, unrivaled performance

Overlay pipe is manufactured with high-abrasion and medium impact in mind, combining a mild steel base plate with an incredibly hard overlay hard surface. The result is an overlay pipe that can defeat even the most challenging of wear scenarios.

Available in a wide array of sizes, our team can work with you to supply the overlay pipe that will best suit your needs. Our staff of engineers can identify the source of operational challenges and seek out a solution that will best suit your timeline, existing plans, and budget.

The JADCO process produces a microstructure consisting of fully austenitic matrix filled with primary carbides. This structure provides outstanding abrasion resistance in the most challenging applications. Standard wall thickness range from 1/8” through 3/8”.

CHROMEWELD^™ FLOW Fabrication Facts

Cutting: Plasma burning, air arc, abrasive saw cutting, or waterjet.

Machining: The overlay surface can be finished by grinding only. EDM, plasma arc cutting, or carbon-arc gouging may produce countersunk holes for bolts. Pre-machined mild steel inserts may be welded into straight holes for additional machining. CHROMEWELD™ FLOW cannot be machined by ordinary methods.

Cold Bending: Material is not readily formable.

Welding: CHROMEWELD™ FLOW overlay pipe can be joined by welding substrate to substrate using 309 weld wire/rod. Fittings include bends, elbows, tees and reducers. All interior weld seams and all other joints exposed to wear should be protected by a cap weld of CHROMEWELD™ FUSION.

Mechanical Information

CHROMEWELD™ FLOW typical hardness ranges from 52-56 HRC with a single weld pass thickness. On a double weld pass the hardness increases to 58-62 HRC.

General Overlay Chemistry

Standard Plate size is 90” X 120” with bead direction running the length. 90” x 240” plates available in certain thicknesses.
CHROMEWELD™ 600 displays excellent abrasion resistance and will withstand continuous moderate impact.
CHROMEWELD™ 600 overlay will remain abrasion resistant at temperatures up to 1100°F.
Standard thicknesses range from 1/8” on 1/8” (.25”) through 1/2” on 1” (1.5”).

Your specific application needs, including custom requirements (thickness, alloy and size), are capable at JADCO. The JADCO process produces a microstructure consisting of fully austenitic matrix filled with primary carbides. This structure provides outstanding abrasion resistance in the most challenging applications.

General Overlay Chemistry

Diameters Available from 5” – 48”
Lengths will vary based on diameter of the pipe.
CHROMEWELD™ FLOW displays excellent abrasion resistance and will withstand continuous moderate impact.
CHROMEWELD™ FLOW overlay will remain abrasion resistant at temperatures up to 1100°F.
Standard wall thicknesses range from 1/8” – 3/8”
Your specific application needs, including custom requirements (thickness, alloy and size), are capable at JADCO.