ATTENTION TO DETAILSJADCO • Rich F.
There are no bonus points for getting the correct fit “close” when you are installing wear resistant steel replacement parts. Either they fit or they don’t, “close” doesn’t work here.
To Make It Work, The Importance Is In The Details
This is why JADCO takes the time to get every detail correct. When you order a replacement component from anyone including the OEM, you expect it to fit like it just came from the factory.
Yet here is where attention to the details make all the difference in the world.
Examining the factors involved in just abrasive wear applications, we see the following:
The Important Point Here Is All Four New Loaders, Came With The Same Capacity BucketYet the dimensions were not the same!
Here are the Bottom Straight dimensions for each of the four loader buckets:
Had we stopped after measuring the first unit for a quote, the customer might have assumed they were all the same and ordered four liners. If the customer had done that, the other three liners would not have fit. By measuring each loader, we made certain each liner fit the correct loader.
Keep In Mind This Is An Industry Leading Manufacturer With The Same Bucket Specifications
Did you think they would vary in size? The owner was stunned that one bucket could be 5” longer than the other.
The Details Matter, And JADCO Gets Them Right For Your Benefit
We don’t stock pre-formed liners for any bucket. Measuring each individual piece of equipment, allows us to verify it will fit with a minimum of hassle for your installation.
Easier Installation And Longer Life, Equals The Obvious Choice.
JADCO’s QT Plus ® delivers greater performance IN YOUR WEAR APPLICATIONS than the various AR400 steel plates you have used previously.
Being able to create wear resistant steel having the same hardness through the entire thickness of the steel, demands you accurately control the alloying chemistry with precise heat treating.
Does Every Steel Company Make Their Wear Plate Last As Long As JADCO QT Plus ®?
The quick answer is No; although the attention to detail required at the steel mill in Pennsylvania is available to anyone. Yet most wear plate distributors choose to reduce the proper quantities and percentages of these essential alloying elements, to get a lower selling price. When you have to cut back on these critical alloys, wear life always suffers.
For the last 40 years we have focused exclusively on delivering consistent, longer life for our customers.
Now you understand why JADCO delivers better results for our customers. We think differently by focusing only on your results.
Remember, the only thing you have to lose by not working with JADCO, are your profits.
When your standard wear plate gives out, be certain to give JADCO a shout! (724) 452-5252.